How to install new garage door opener
How to install new garage door opener
Tips before installing a new Garage Door Opener.
If you want to install New Garage Door opener, it can cost you a hefty amount, but the DIY can help you to save a handsome amount.
There is a list of expert tips which we have brought to you to help you in easier installation and trouble-free operation of the Garage Doors.
1. Check the Panel You must first check if you can install a new opener by removing the old one from the panel and checking that it is compatible with your current garage door opener. If it is not a compatible, then you have to replace the old one first before installation or have to design it to fit on your panel.
In case, there is no option of redesigning on your panel then you can choose replacement as well and make sure that the power outlet where your old opener comes into has enough capacity for new unit.
Check whether the door parts are working or not
You must check that whether your garage door is misbehaving because of the opener or the rollers.
You might not have to purchase the opener as the problem might have been caused because of the wobbly rollers. Before finding the solution, it is always better to know the problem precisely
In case the opener is causing problem, you must get in touch with your opener dealer to fix or replace it. In case your garage door is uneven because of the rollers, you can use a jack and support beams to level out the door .
If you are not sure about what exactly is going on with your garage door, call a professional service provider to fix the issue .
Door Balance should be checked
To test the door balance, you should open the door halfway and then let it go. You can easily check whether the torsion spring is alright or out of adjustment by the vertical movement of the door on its own which makes your door opener work harder and get damaged faster.
A few more things you should know about Some people might not know that the torsion spring tension is adjustable. The tension can be changed manually to suit the door weight and number of people using the door.
You may need to reset the tension by turning your knob counter-clockwise while keeping it held in a certain position, which then resets back to its original position after being released.
Right opener should be chosen
You must bring 1/3 hp or ½ hp door opener for a single garage door, ½ hp opener will be good to go with double door and ¾ hp for the door with an overlay of wood or faux wood.
Installing an opener with higher horsepower will not help you in increasing the opening speed of the door as every door opener has a set speed. You can choose your door openers from a range of available openers such as chain drive, screw drive or belt drive.
Positioning the opener
The garage door opener should be placed on a ladder, and scrap lumber should be used to get it height it needs.
Then, the opener’s rail can be aligned to the center of the garage door. You must keep the door open while you install new garage door opener as it would be easier to align the opener with the center of the door when the door is kept open.
Place the opener on the rail, and then screw it in. If you had to replace a garage door opener, here are some things to keep in mind: The most vital part you need is a garage door opener. You will also need screws and drill bits.
If your old model is broken or has stopped working, it might be time for a new one that’s easier than ever to install.
Use angle iron to hang the opener
You will find some flimsy straps which come with some garage door openers, but it is always advisable that they shouldn’t be used. You must use solid mounting which will lead to less vibration and longer life.
You must attach an angle brace to avoid the sway in case the opener is more than 6 inches from the ceiling.
The best garage door opener will have a weight limit of 225 pounds, and it must be able to support up to 10 tons. Today’s openers are also designed in such a way that they are safer for pets and kids. Type of Garage Door Opener
All the Components should be replaced and check the door’s opening force too.
Don’t even think of reusing any of the parts of the door opener like wall button or photoelectric eyes. All of them should be changed as new parts are designed for your new opener.
You should check the door’s opening force and also fine tune the forces. You need to do the small adjustments to get the force exactly what it should be.
Get the reversing door fixed
You can fix the reversing door by adjusting the closing force or by clearing the photoelectric eyes as they are very sensitive and can be even interfered by the cobwebs.
Tools to be used:
· Clamps
· Drill/Driver-cordless
· Hacksaw
· Tape measure
· Wrench set
At last, look for any of the loose wires in the eyes and the door opener
Hope the knowledge supplement will guide you in installing a new garage door opener.
We do not just create performant devices; we create a connection between people and the world. We are resourceful and creative. We love to innovate.
We believe that imagination has no limits. We are always a step forward in the development of new technologies.
